Categories
When it comes to sewage treatment and solids handling, vertical dry pit pump fitted with normal motor is sometimes required for some applications and in some countries.
Typically such pump is installed on a supportive suction inlet.
We provide four series to cover all ranges.
 WL series This type is widely used in China for vertical dry pit installation. Flange size: 32-600mm Flow range:5-6000m3/hr Head range: 5-65m |
 MN/MF series Hydraulics of MN, MF pump were developed and designed with non-clog impellers and large free solids passage. Flange size: 10-72 inch for MN, 3-16 inch for MF Flow range: up to 45,500 m3/hr for MN, 2,275 m3/hr for MF Head range: up to 90m |
 Screw centrifugal impeller pump series Screw centrifugal impeller pumps allow almost clog-free operation for a wide range of applications, with flat power curve and are used especially for gentle handling. Flange size: 80-500mm Flow range: up to 3600m3/hr Head range: up to 55m |
 Vacuum assisted centrifugal pump This type of pump is famous for handling liquids contenting solids and sludge. When it’s not coupled with the special priming system, the pump itself is perfect for other type of configuration, because it provides low, medium and high head ranges. Flange size: LH/4-42 inch, MH/4-12 inch, HH/3-8 inch Flow range: LH/150-13,000m3/hr, MH/up to 2,000m3/hr, HH/up to 2,400m3/hr Head range: LH/10-75m, MH/up to 110m, HH/up to 250m |
Available configurations
Vertical Coupled
Vertical Frame
Vertical Close Coupled (Mainly for WL series)
Installation type
Suction elbow support
Bottom reducer suction
Inquiry Now
